Date: ������������������������� 2023-05-03
Package
Version: ����� 1.2.2
This file contains
information about the DigiLock 110 Remote Control Interface software package
developed by TOPTICA Photonics AG.
NOTE !
The DigiLock 110 RCI
is a supplementary free add-on developed by TOPTICA Photonics AG on customer
requests. However, due to the complexity of individual hard- and software
configurations there is no support provided for the DigiLock 110 RCI.
Contents
Processor: �������������� x86 platform (e.g. Pentium III,
4, M), min. 800 MHz,
�������������������������������� recommended
> 1.2 GHz
RAM: ��������������������� min. 256
MB, recommended 512 MB
Operating System: � Windows 7 SP1 32-/64-bit, Windows 8.1
32-/64-bit, Windows 10 32-/64-bit,
LabVIEW:�������������� Version 7.1
or newer
To view the
user manual please install Adobe Acrobat Reader�.
Version
1.2.2
�
Manual
updated.
Version
1.2.1
�
Manual
updated.
Version 935
(1.2.0)
�
autolock:relock:output
�
autolock:window
�
pid<x>:window
Version 706
�
Option in Scope-Set Channels.vi whether to set CH x or not
�
Display-Set View.vi and Function-Set View.vi modified such that setting
the current view again does not lead to an error message
Version 688
(1.1.1)
�
Scope-Get
Timescale.vi: timescale also available as double value
�
Scope-Get
Frequencyscale.vi: frequencyscale also available as double value
Version 935
(1.2.0):
�
autolock:input:treataslipdh
�
autolock:lock:hold
�
li/pdh:aio1outselection
�
pid<x>:lock:hold
�
pid<x>:hold:state
�
pid<x>:regulating
state
�
pid<x>:relock:output
�
response:modulation:input:overload
�
response:modulation:output:overload
�
simulation:includecontroller
�
simulation:includeconverters
�
simulation:includeinputfilter
�
simulation:includelipdh
�
spectrum:ch<x>:show
dc
Version 688
(1.1.1)
�
Speed
of Remote Control Interface improved significantly (for functions handling
arrays)
Bug-No. |
Discovered in version |
Description |
Status |
0001 |
682 |
Scope-Get
Timescale.vi: command string was wrong |
fixed |
0002 |
688 |
Simulation-Set I Cut-off.vi
and PID1-Set I Cut-off.vi did not work as expected |
fixed |
0003 |
688 |
Scope-Set Channels.vi:
CH x was always set, regardless if the control is enabled or not. An error
messag is issued if the control is not enabled |
fixed |
0004 |
688 |
PID-Get Lock Enable.vi,
PID-Set Lock Enable.vi: wrong command is sent |
fixed |
0005 |
706 |
DigiLock-RemoteControl_Demo1.vi:
wrong description in the box �How it works� |
fixed |
|
|
|
|