Picosecond Ytterbium Fiber Laser: PicoFYb 1030
- Ytterbium fiber laser based on SAM technology
- 1030 nm wavelength
- 20 MHz repetition rate
- 2 to 10 ps pulse duration
- Up to 15 mW
- Alignment-free all-fiber setup with telcordia proved components
- Only polarization maintaining fiber components
- No air or water cooling required
- Robust and cost-effective design
- Compact footprint and turnkey operation
The PicoFYb laser systems are fiber-based picosecond oscillators for seeding industrial laser systems, e.g. for micro-machining. The PicoFYb laser pulses with excellent amplitude and frequency jitter parameters are amplified to typical multi-Watt levels in the MOPA (master oscillator, power amplifier) laser or regenerative amplifier systems of our customers. Typical amplifiers are slab, rod and disc lasers operating in the 1 µm wavelength regions.
Technical Information
Technical Information
Key specifications
| Model | 1030 | |
|---|---|---|
| Wavelength | 1030.5 ± 0.5 nm | |
| Average power | > 10 mW | |
| Repetition rate | 20 ± 0.5 MHz | |
| Pulse duration (FWHM) | < 10 ps | |
| Spectral width | < 0.5 nm | |
| TBP * | 0.5 (typ.) | |
| RF side mode supression | < -60 dBc | |
| Pulse-to-pulse noise | < 3 % | |
| Output | SM/PM-fiber (narrow key FC/APC receptacle) | |
| Power supply | 12 VDC, less than 10 Watt power consumption | |
| Weight | < 3 kg | |
* Time-bandwidth product
Autocorrelation, spectrum and RF spectrum (PicoFYb 1030 AMP)
Options & Related Products
Options & Related Products
Options
(possible for OEM quantities – not for single units)
(possible for OEM quantities – not for single units)
- 1025 to 1035 nm
- Up to 60 mW output power
- 15 to 80 MHz repetition rate
- 2 to 10 ps pulse duration
SwitchBox
The FemtoFiber smart SwitchBox is a small tool for quick starters. It provides all switches, supply and status lines to run a PicoFYb as a stand-alone system without integration environment and therefore is especially recommended for single-system users.
The FemtoFiber smart SwitchBox is a small tool for quick starters. It provides all switches, supply and status lines to run a PicoFYb as a stand-alone system without integration environment and therefore is especially recommended for single-system users.
Related Products:
- Fiberdock 2 V0 as universal beam outcoupling unit
- Fiber patch cord
TOPTICA offers best-suited fiber patch cords for your PicoFYb system in 0.5 or 1 m length - FemtoFiber pro UCP (980 - 1400 nm, < 25 fs)
Technical Drawings
Applications
Download
Download
Press release: PicoFYb – Industrial Picosecond Fiber Lasers at 1030 / 1064 nm
toptica_PR_PicoFYb_2008.pdf
toptica_PR_PicoFYb_2008.pdf
