TOPTICA Photonics AG - A passion for precision - www.toptica.com

PID 110

Versatile PID Regulator

    • Ideally suited for side-of-fringe laser stabilization
    • P, I, D parameters individually adjustable
    • Variable total gain
    • High Voltage output e.g. for driving piezos
    • Automatic ReLock feature

    The PID 110 is a proportional-integral-differential regulator for frequency stabilization of tunable diode lasers (DL pro, DL 100, DL DFB). It accomplishes side-of-fringe locking to the slope of an atomic line or a cavity transmission peak. The module works both for HV (piezo actuators) and LV (laser current) control tasks. Users can adjust all relevant parameters, including P, I and D contributions, set point and regulator output range.

    • Specifications
      • Side-of-fringe stabilization
      • Regulator output -5  .. +150 V, max 30 mA
      • External modulation input -5 V .. +5 V
      • LV small-signal bandwidth up to 1.5 MHz
      • Gain * bandwidth product 3 MHz (for gains ≥ 2)
      • HV small-signal bandwidth > 10 kHz (current limited to 30 mA)

       

      Accessible Parameters

      • P, I, D -contribution of the control loop individually adjustable by precision trimmers
      • Adjustable regulator set point for side-of-fringe stabilization
      • Lock status display with 3 LEDs (search, unlock, reset)
      • Ramp/Modulation ON/OFF switch and regulation ON/OFF switch
      • Inversion of the control output with switch POS/NEG
      • On request a relock-mechanism can be activated (automatic search for the next stabilization mode) when stabilizing on external resonators, FPI´s etc., indicated by red relock-LED
      • External modulation input or internal synchronization with scan control SC 110 possible
      • Controller ON/OFF switch
      • HF-tight cassette, width 12 TE (60 mm) 

       

      Input / Outputs

      • SubD9 connector for actual signal in, controller output voltage
      • BNC connectors for external modulation input
      • BNC connector for buffered monitor signal, modulation, HV/100, controller output, error signal, signal in, set point
      • BNC connector for regulator output: -5...150 V, max 30 mA
    • Additional Information
    • Applications
      • Metrology
      • Cavity ring down spectroscopy
      • Resonant enhancement for frequency doubling
    • Downloads
    • Literature
    • Related Products