The first Digital Feedback Controlyzer – a versatile locking and analysis tool

DigiLock 110: Digital Laser Locking

TOPTICAs DigiLock 110 is the versatile solution for laser control, stabilization, characterization & analysis. Its digital nature makes it easy to use, flexible and intelligent. The FPGA based hardware allows for high bandwidth and flexibility, and with its clever software one has the overview, but can go into every tiny detail if need be.

Technical Information

Technical Information

FunctionalityValueUnitComment
Scan function
Scan frequency0.1 - 33 x 106HzBandwidth limited on some channels
Waveform typesSine, triangle, square, sawtooth
PID function 1
Signal latency200nsADC and DAC latency included
ParametersP, I, D, I cut-off
PID function 2
Signal latency200nsADC and DAC latency included
ParametersP, I, D
Analog P function
Bandwidth21 MHz (-3 dB, -200° phase)
Lock-In function
Modulation frequency12 - 781 x 103Hz
Pound-Drever-Hall function
Modulation frequency1.56, 3.13, 6.25, 12.5, 25MHz



GeneralValue
Supply voltage± 15 V
Supply current +15 V (typ)700 mA
Supply current -15 V (typ)200 mA



Input
channels
Resolution
(bit)
Sample rate (Hz)Bandwidth
(-3 dB) (Hz)
Range
(V)
Impedance
(Ohm)
Comment
Main in14100 M14 M± 2.150Input signal at <Main in> has to be between ± 3.5V; it can be shifted with the <Input Offset> and amplified with the PGA
Aux in14100 M15 M± 2.150
Precise in16200 k50 k± 2.010 k
DCC Iact16100 k15 k± 13.140 kSYS DC 110 backplane
DTC Tact16100 k15 k± 13.140 kSYS DC 110 backplane
AIO 1 in16100 k15 k± 12.547 kNormally used as output
AIO 2 in16100 k15 k± 12.547 k
Sum in27 M± 1.050Bandwidth between <Sum in> and <Main out>



Output
channels
Resolution
(bit)
Sample rate (Hz)Bandwidth
(-3 dB) (Hz)
Range
(V)
50 Ohm
driver
Comment
Main out14100 M19 M± 1.0YesSum of <Sum in> and Analog P branch
Aux out14100 M19 M± 1.0Yes
SC 110 out21100 k18 k± 6.5NoSYS DC 110 backplane;
amplification by 15 with SC110
DCC Iset21100 k18 k± 6.5NoSYS DC 110 backplane
DTC Tset16100 k18 k± 6.5NoSYS DC 110 backplane
AIO 1 out16100 k16 k± 6.5No
AIO 2 out16100 k16 k± 6.5NoNormally used as input
Error out20 M± 1.7YesError out = (<Main in> + <Input Offset>) x Gain/2; bandwidth between <Main in> and <Error out>
TRIG0, 2.6Yes

 

 

Options & Related Products

Options & Related Products

Related Products:

PID 110LIR 110PDD 110FALC 110DigiLock 110LaseLockWavelength MeterIscan
Description / typeAnalog
PID
Analog
Lock-In
Regulator
Pound-Drever-
Hall Signal
Generation
Fast Analog
2-Channel
PID
Versatile Digital
Locking Solution
Suited for
third party
lasers
Wavelength meter with PID optionLow finesse
etalons as reference with
Lock-Electronics
Side-of-fringe
Not applicable

Top-of-fringeWith PDDWith PDD
Locking bandwidth*kHz .. MHzkHz range≈ 45 MHz≈ 10 MHz1 MHz< 100 HzkHz range
Modulation frequency0.6 Hz .. 14 kHz20 MHz **17 Hz .. 25 MHz33 Hz .. 1 MHzNot applicable
AccuracyDepends on reference (can be very good)> 10 MHz1 MHz (relative)
Signal analysis
Relock mechanisms
Computer control
High voltage output
High bandwidth output
Two channel version
SYS DC 110 module
Stand-alone
low budgethigh end & preferrable

*Estimated bandwidth depends on gain and PID settings  **5- 40 MHz versions available

Technical Drawings

Technical Drawings

Applications

Applications

  • Easy locking for everyone
  • Tight laser frequency stabilization
  • Laser linewidth reduction
  • Laser and spectroscopy transfer function analysis


Application Notes

Download